Original NES Wall Mount

Display your original Nintendo Entertainment System (NES) with this custom 3D printed wall mount. Designed for a snug fit, it holds the console securely while keeping ports and cartridge access unobstructed.

This mount measures approximately 7 1/4" W (≈ 184 mm) between the outer edges of the brackets, with a depth and height sized to fit the original NES shell. Printed in durable PETG, it offers both strength and a clean display-ready look.

Mounting hardware is included:

4 screws (#7 × 1")

4 drywall anchors (#7 × 1")

Installation requires a 3/16" drill bit and a Philips head screwdriver. The included screws and anchors are rated for up to 30 lbs in good condition drywall. Wall anchors must be used when mounting. The console is not intended to be used while mounted, as this may cause unnecessary strain on the mount.

Because each order is custom made, minor imperfections or layer lines are normal with 3D printing and give every piece its own unique character.

Made in the USA.

1218 Studios is not responsible for any damages caused by misuse or incorrect mounting. If you have any questions, please reach out through the Etsy message center—we’re always happy to help!